Pairing ZM16b with Hunter 201D 16 Channel

I received my ZM16b shade motors with a Hunter 201D 16 Channel Remote. Mounted them up yesterday and then tried pairing the remote to the shades. As per the instructions…

“Press the settings button 1x on the shade motor, Shade Jogs”

“Immediately press the STOP button on the remote to pair”

Well I spent an hour trying that multiple times, probably too many times, to each shade and I can not get it to pair. The included remote instructions are pretty horrible, the Shade instructions are good but they show a different remote.

Is there something I am missing here? Do i need to reset the remote fully before pairing, as seen with other ZemiSmart remotes on Youtube. Do I have a bad remote? What are the “S1” and “S2” buttons by the battery for? Any advice will be appreciated as I would like to use the remote.

The pairing method for the ZM16B with the Hunter 201D remote is:

  1. Press the SET button on the motor once — the motor will jog.
  2. Immediately press the STOP button on the remote to complete the pairing.

If it still cannot be paired, please provide us with your order number. We can check whether the motor and remote have the correct compatible protocol.

Good Morning.
The shade does not pair using this method.
Order number: 26092523002798

Thanks
Brian Zura